 |
|||||||||||||
| gallery | |||||||||||||
 Luminex Lighting Control Equipment specialize in developing lighting control equipment for the entertainment industry, using the latest technologies available to bring high performance products with high reliability, excellent service and support. |
|||||||||||||
|
DMX512-A 1.5 Hub
The DMX 1.5 Hub is a DMX distribution box with 1 dedicated input, 1 through and 5 outputs. All in- and output connectors conform to the new DMX 512-A standard. This allows half-duplex data transport on a normal DMX connection such as fixture talk back and RDM (protocol independent). Features . DMX512-A and RDM compatible . Individual outlet protection on in- and outputs . 1000 Volts optical isolation barrier . Short circuit protection to protect against incorrect wiring . Line voltage protection . Self-healing technology . Rugodised aluminium enclosure with M10 insert for truss mounting and eye-bolt for safety |
 |
||||||||||||
|
DMX512-A 2.10 HUB
The DMX Hub is a DMX distribution box with 2 dedicated input connectors and 10 configurable output connectors. All in- and output connectors conform to the new DMX 512-A standard. The hub has 2 separate DMX zones with all outlets protected individually. The hub can be used to distribute 1024 dmx channels on the 2 DMX lines. This all comes in a 19”, 1 unit high metal housing. The hub has 10 configurable output connectors (Neutrik 5 pin female). Every outlet has a tiny switch to select whether it's connected to zone 1 or zone 2. The device operates with an AC voltage between 85V and 264V. The power management circuit regulates the internal power and loads the internal backup battery. The internal backup battery insures the operation of the complete unit for 30 minutes (when fully loaded). This means that during power failure, your DMX distribution is not interrupted and the complete optical and galvanic protection remains on every single outlet. A tri-coloured LED next to the power switch indicates the power situation. Features . 2 DMX512-A in/outputs on 5 pin male XLR, with termination (RDM compliant) . 10 DMX512-A in/outputs on 5 pin female XLR, with termination (RDM compliant) . Fixed mains lead (90-260 VAC, 47-63 Hz) . 2 DMX512-A in/outputs on 5 pin male XLR on the back panel (identical to the 2 zone inputs on the front end) . Availables connectors : Neutrik XLR 3 & 5 pins, Ethercon . Mixed configurations on demand |
 |
||||||||||||
|
Ethernet-DMX2
The Ethernet-DMX2 is an ethernet node that serves 2 DMX512-A outlets, compatible with the Artnet protocol. Both outlets are conform to RDM and can be used as input or output. The ethernet link is a 10/100BaseT (autodetect) connection on a Neutrik RJ45 Ethercon connector. Connections . A 10/100 BaseT Ethernet connection on a Neutrik RJ45 Ethercon connector . 2 DMX512-A in/outputs on 5 pin female XLR, with termination (RDM compliant) Operation . Ethernet <-> DMX (ArtNet) . DMX Merger. DMX Backup . DMX splitter / booster . Wysiwyg enabled . DMX inputs can be visualised in Wysiwyg Features . DMX routing, universe setting . Input and output enable / disable . DMX input / output frame rate setting . IP settings . Unit ID and labeling . Ethernet activity indication on front panel . Up to 40 programmable profiles and routings . Up to 10 predefined profiles (ethernet, splitters, mergers) |
 |
||||||||||||
|
Ethernet-DMX8
The Ethernet-DMX8 is an ethernet node that serves 8 DMX512 outlets, compatible with the ArtNet protocol. All 8 outlets are conform to RDM and can be used as input or output. The ethernet link is a 10/100BaseT (auto detect) connection on a Neutrik RJ45 Ethercon connector. All configuration can be done over ethernet through a built-in website, or by using the controls on the front end. A bright blue LCD with white text and 5 navigation keys are provided to control the unit. This all comes in a 19" 1 unit high metal housing. Connections . A 10/100 BaseT Ethernet connection on a Neutrik RJ45 Ethercon connector . 8 DMX512-A in/outputs on 5 pin female XLR, with termination (RDM compliant) . Fixed mains lead (90-260 VAC, 47-63 Hz) Operation . Ethernet <-> DMX (ArtNet) . DMX Merger . DMX Backup . DMX splitter / booster . Wysiwyg enabled . DMX inputs can be visualised in Wysiwyg Features . DMX routing, universe setting. Input and output enable / disable . DMX input / output frame rate setting . IP settings. Unit ID and labeling . Ethernet and DMX activity indication on front end display . Up to 40 programmable profiles and routings . Up to 10 predefined profiles (ethernet, splitters, mergers) |
 |
||||||||||||
|
Ethernet-DMX8/WiFi
The Ethernet-DMX8/W is an ethernet node that serves 8 DMX512 outlets, compatible with the Artnet protocol. With an integrated Access Point the Ethernet-DMX8/W is capable to transfer data with a maximum wireless signal rate of up to 22 Mbps with 802.1x support for improved wireless security. All 8 outlets are conform to RDM and can be used as input or output. The ethernet link is a 10/100BaseT (autodetect) connection on a Neutrik RJ45 Ethercon connector. All configuration can be done over ethernet through a build in website, or by using the controls on the front end. A bright blue LCD with white text and 5 navigation keys are provided to control the unit. This all comes in a 19" 1 unit high metal housing. Connections . A 10/100 BaseT Ethernet connection on a Neutrik RJ45 Ethercon connector . 2 SMA WiFi antenna connections (up to 17dB) . 8 DMX512-A in/outputs on 5 pin female XLR, with termination (RDM compliant) . Fixed mains lead (90-260 VAC, 47-63 Hz) Operation . Ethernet <-> DMX (ArtNet) . DMX Merger . DMX Backup . DMX splitter / booster . Wysiwyg enabled. DMX inputs can be visualised in Wysiwyg Features . DMX routing, universe setting . Input and output enable / disable . DMX input / output frame rate setting . IP settings . Unit ID and labeling . Ethernet and DMX activity indication on front end display. Up to 40 programmable profiles and routings . Up to 10 predefined profiles (ethernet, splitters, mergers) |
 |
||||||||||||
|
Safety Ring Switch
LUMINEX Safety Ring Switches (SRS) provide very fast, fault-tolerant network redundancy and prioritized message delivery needed in critical real-time systems. Safety Rings self-configure and just run, without the complex configuration steps required by alternative solutions. This break-through product delivers reliability and performance, saves you money, and makes your job easier. The SRS comes as a 9-port switch, 2 Multi mode Optical fiber SC connections and 7 Ethercon connectors. One of the 7 Ethercons is placed on the front to easily connect your Laptop or other Ethernet devices to the Ring system. Real-time fault-tolerant rings . Preconfigured Ring on optical ports . Recovery time of 30 ms plus 5 ms per hop! Real-time traffic prioritization . Assure delivery of real-time data . Improve network utilization . User settable priority assignments Managed Switch features . Dedicated free downloadable Tool for advanced customisation . User configurable port settings . Port mirroring for traffic diagnostics . Pre-configurable for plug and play simplicity Reliability and long-term support . Ultra-reliable 1,000,000 hours MTBF Certified for harsh industrial environments . - 40 to +85°C operating range . 90-260 VAC, 47-63 Hz |
 |
||||||||||||
|
GigaSwitch 8
The Luminex GigaSwitch 8 Ethernet Switch is equipped with eight neutrik ethercon ports providing 10/ 100/ 1000 Mbps Bandwidth. These ports can be used for connecting PCs, Media servers, ArtNET node. The eight multi-speed ports use standard twisted pair cabling and are ideal for segmenting networks into small, connected SubNets. Each port can support up to 2000 Mbps of throughput in full-duplex mode. This stand-alone GigaSwitch enables the network to use most multimedia and imaging applications concurrently with other user applications without creating bottlenecks. Features . Eight 1000 Base-T Gigabit Ethernet ports . 6 Neutrik Ethercon ports . Cable Diagnostic function at switch boot . Supports Auto-negotiation for 10/100/1000Mbps and Duplex mode . Supports Auto-MDIX for each port . Supports Full/Half duplex Transfer mode for 10 and 100Mbps . Supports fill Duplex transfer mode for 1000Mbps . Full Wire Speed Reception en Transmission . Store and Forward switching method . Supports 8000 absolute MAC adresses . Supports 1 M bits RAM for data buffering . Front Panel with diagnostic LEDs . IEEE 802.3x Flow control for full-duplex . Back Pressure flow control for half-duplex |
 |
||||||||||||
|
LumiNet Monitor
LumiNet Monitor is a PC application to monitor all Luminex devices on the network. The application is designed to give you an overview of the complete configuration/routing of the Luminex Ethernet-DMX nodes. You can lock individual channels or complete outputs. This will overrule ArtNet data and can be used to troubleshoot devices, or create save situations. All locked channels can be controlled individually with a small fader control. The lock status and values can be save in presets, which can be recalled by a press on a function key. This gives you fast access to lock outlets in case of problems. Also an ArtNet monitor is included. By changing the view you can monitor all ArtNet DMX packets on the network. All devices producing DMX inputs on the network will be listed. The data view can be changed to bar graphs, Hex or decimal values. |
 |
||||||||||||
| back to sales | |||||||||||||
|
For further information on Luminex Lighting Control Equipment products, please contact John McKissock
|
|||||||||||||
|
|||||||||||||
|
Copyright © 2009 Clearlight Shows Pty Ltd. All rights reserved - designed by 3Pstudios of aussicom international pty ltd melbourne
|
|||||||||||||
